Peak PCAN-USB FD User Manual page 29

PCAN-USB FD – User Manual
The Destroy Single Frame area refers to the next CAN frame that is
recognized by the PCAN-USB FD adapter after activation.
Do the following to destroy a single CAN frame:
1. Enter the Bit Position where in the CAN frame the error is to
be generated. The count includes the stuff bits.
2. Execute the destroy action with Do it.
The next received or transmitted CAN frame will be des-
troyed at the selected bit position.
The Destroy Multiple Frames area refers to a CAN ID whose frames
are to be destroyed in specific intervals.
Do the following to destroy multiple CAN frames:
1. Enter the CAN ID of the frame to be destroyed.
2. Enter the Bit Position where in the CAN frame the error is to
be generated. The count includes the stuff bits.
3. The Number of Frames to ignore field specifies the number
of CAN frames with the given ID that are ignored before a
frame is destroyed.
4. The Number of Frames to destroy field specifies the number
of CAN frames with the given ID that are destroyed
consecutively.
5. Confirm the entries with Apply to activate the error gene-
rator. Stop destroying further CAN frames with Disable.
29