Peak PCAN-USB FD User Manual page 19

PCAN-USB FD – User Manual
Do the following to start and initialize PCAN-View:
1. Open the Windows Start menu or the Windows Start page
and select PCAN-View.
The dialog box for selecting the hardware and for setting
the parameters appears.
Figure 6: Selection of the specific hardware and parameters
2. From the list Available PCAN hardware, select the desired
interface to be used.
3. Chooses the Clock Frequency. The selectable bit rates in the
following are based on this setting.
4. Select from the drop-down list Nominal Bit rate the
transmission rate that is used for the Arbitration phase.
Choose from the drop-down list Data Bit rate, an additional
data bit rate for the CAN-FD bus. The bit rate selected here
is used to transfer the data fields of a CAN frame with a
higher bit rate.
19