Cleaning And Maintenance; Know Your Machine - Nilfisk-Advance OZ 1 Information & Operating Instructions

INSPECTION:
Carefully unpack and inspect your Nilfisk OZ 1 for shipping damage. Each machine is tested and
inspected before shipping. Any shipping damage incurred is the responsibility of the carrier who should be
notified immediately.

CLEANING AND MAINTENANCE:

There is no scheduled maintenance required on your Nilfisk OZ 1 other than cleaning or replacing the
filter at the air intake, as needed. To access the filter, remove the plastic cover by gently pulling on a
corner of it. The stainless steel filter can be cleaned with any detergent. Clean the body with a mild all-
purpose detergent, and protect it with an automobile interior polish.

KNOW YOUR MACHINE:

OZONE OUTPU
1 Set the timer
2 Set the ozone amount
3 Turn the machine ON
SEE COMPLETE
OPERATION
INSTRUCTIONS
TIMER
DISPLAY
AND
CONTROL
PANEL
T
Set the amount of ozone volume
to 25%, 50%, 75%, or 100%
BUILT-IN
HANDLE
3
FRESH AIR
INTAKE
TURN UNIT ON
OR OFF
SET THE TIMER
SET THE
% AMOUNT