Troubleshooting; Specifications And Features - Nilfisk-Advance OZ 1 Information & Operating Instructions

Hide thumbs Also See for OZ 1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

TROUBLESHOOTING:

CAUTION:
ALWAYS UNPLUG THE MACHINE BEFORE YOU DO ANY TROUBLESHOOTING
IF THIS OCCURS --
NO POWER
TIMER DOES
NOT WORK
CAN NOT
SELECT THE
% OF OZONE
WARNING: Use only original Nilfisk spare parts in the ozone machine

SPECIFICATIONS AND FEATURES:

Output volume:
Maximum Output:
Timer:
Generation Method:
Air Flow:
Deminsions:
Weight:
Features:
CAUTION: BE SURE TO KEEP THE AIR INTAKE FILTER CLEAN
CHECK THIS
Make sure the power cord is plugged into an operational outlet.
Look at the circuit breaker on the bottom of the machine, to make
sure it has not tripped.
Check the internal safety switch to make sure it is being activiated
when the bottom cover is installed.
The digital display has segments missing from some numbers.
The timer
buttons do not change the time display.
The time display does not change as time passes.
The % button does not work; the amount of ozone light does not
move.
The % button does work, but one or more of the red lights does not
turn on.
Variable
2.2 grams/hour; 6.6 ppm
Digital, 0 to 29 Hours
Patented, high-density ceramic and stainless steel electrodes
2.83 m
/minute
3
55.9 L X 20.3 H X 18 W cm
5.85 kg
• Rugged construction means reliability
• No maintainence of plates or UV tubes
• Over-load protection
9

Advertisement

Table of Contents
loading

Table of Contents