Maintenance; Bulb Housing Assembly Removal And Installation - Nilfisk-Advance Liberty SC50 Instructions For Use Manual

A - ENGLISH

MAINTENANCE

Every 3 months remove the housing and carefully wipe down the re ectors and bulbs with a slightly damp cloth (after the bulbs have fully cooled)
to keep the unit in top shape. Also at this time inspect to ensure everything is intact and nothing is loose.

BULB HOUSING ASSEMBLY REMOVAL AND INSTALLATION

Bulb Housing Removal
CAUTION!
Power Off machine and allow the bulbs to fully cool.
Do not grab the bulbs or in any way put pressure on them while separating the Bulb Housing from the UV Frame
Assembly as this could break the bulbs.
1. Carefully slide off the Bulb Housing from the UVGI Mount Assembly.
UVGI Mount Assembly
Rail
Guide
Bulb Housing Installation
CAUTION!
Do not grab the bulbs or in any way put pressure on them while installing the Bulb Housing onto the UV Frame Assembly
as this could break the bulbs.
1. Line up the Guides on the bulb housing with the Rails on the UVGI Frame Assembly. Then push the housing forward and slide it
onto the Frame Assembly until the two magnets connect.
A - 8
INSTRUCTIONS FOR USE
Nil sk Liberty SC50 UVGI - 56091255
Rail
Guide
Bulb Housing
Brush Skirt
7/2021