Table of Contents
Advertisement
Specifications
48
Table 7: Electrical sampling modules - Signal acquisition
Specifications
Characteristics
Real time accessory
Tekprobe- - SMA interface is provided through the electrical
interface
sampling-module interface, one per vertical channel.
Channel input
p
Sampling module
connector
80E02, 80E03, 80E04
80E01
80E06
Number of input
p
Sampling module
channels
80E01, 80E06
80E02, 80E03, 80E04:
n Input impedance
50
Vertical dynamic
1 V
pp
range
Vertical operating
1.6 V
1
range
, maximum
Vertical nondestruct
Sampling module
2
2
range
80E01, 80E06
(Maximum input
(Maximum input
80E02, 80E03, 80E04
voltage)
Vertical number of
14 bits full scale
digitized bits
Vertical sensitivity
The range of available full scale input settings.
3
range
10 mV to 1 V full scale
Compensation
5_ C about temperature where compensation was performed. If
temperature range
compartment is changed on the mainframe, a sampling module
extender is employed, or the length of the sampling module extender is
changed, the channel must be recompensated.
n DC voltage
2 mV
accuracy, single point,
0.02 (vertical value - - assigned offset)
within
5_C of
compensated
temperature
n DC vertical
10 mV
voltage deviation from
linear least squares fit
0.5
(offset
500 mV)
0.007 (assigned offset)
80E00 Electrical Sampling Modules User Manual
Input connector
Precision 3.5 mm female
connector.
Precision 2.4 mm female
connector (2.4 mm male to
2.92 mm (K) female adapter,
015-0703-xx, is supplied).
Precision 1.85 mm female
connector (V) (2.4 mm male to
2.92 mm (K) female adapter,
015-0703-xx, is supplied).
Channels
1
2
Maximum input
2.0 V (DC+peak AC)
3.0 V (DC+peak AC)
Advertisement
Table of Contents
