Hammer Strength MTS HIGH ROW Unpacking And Assembly Instructions page 7

Hide thumbs Also See for MTS HIGH ROW:

2. Bolt the bottom brace to the right side of the MTS HIGH ROW. Slide the right side of the

MTS HIGH ROW up to the bottom brace. With a ¾" socket wrench and combination wrench,

bolt it to the bottom brace using two of the 1/2" x 2-3/4" hex head bolts. Insert the bolts from

the outside of the MTS HIGH ROW. Put on a star washer and hand tighten the locknuts so

that the front brace will be easier to install.

Assembly Figure 2. Bolt the bottom brace to the right side of the MTS HIGH ROW.

MTS HIGH ROW Assembly Instructions

1/2" x 2-3/4"

(2)

2-3/4" BOLT