Hammer Strength MTS HIGH ROW Unpacking And Assembly Instructions page 18

Hide thumbs Also See for MTS HIGH ROW:

MTS HIGH ROW Assembly Instructions

3. HARDWARE

Nuts, bolts, and hammerhead washers are shown in Hardware Figure 1.

Hardware Figure 1. Hardware used to assemble MTS HIGH ROW.

The parts shown in Hardware Figure 1 are used to bolt together the sides, bottom brace, front

brace, seat assembly and arms. They are:

1A. ½" x 2-3/4" hex bolt (seat assembly-base, seat assembly-front, bottom-sides, front-sides)

(12) (0017-00101-1573)

1B. ½" x 3-1/4" hex bolt (top-sides) (4) (0017-00101-1574)

1C. Hammerhead washers (slide onto bolts) (8) (0017-00042-1041)

1D. Star washers (use two on bolts that do NOT have hammerhead washers and on painted

surfaces with nut) (24) (0017-00104-0379)

1E. 1/2" Locknut (16) (0017-00103-0223)

1/2" x 2-3/4"

1/2" x 3-1/4"