Hammer Strength MTS HIGH ROW Unpacking And Assembly Instructions page 11

Hide thumbs Also See for MTS HIGH ROW:

6. Bolt seat bracket to the seat assembly. Bolt upholstery to seat assembly. The bracket is

attached with a rod and a 3/8" x 4-1/4" bolt. Remove the rod and bolt, place the bracket on the

seat assembly and retighten the rod and bolt. Use a 9/16" socket to tighten the bolt. Use a

5/32" hex key to tighten the collar on the rod.

Using two 3/8" x 2-1/2" bolts and 3/8" flat washers, fasten the seat to the seat bracket as

shown. Using four 3/8" x 1-1/2" bolts and flat washers, fasten the chest pad to the seat

assembly.

3/8" x 2-1/2" (2)

Assembly Figure 6. Bolt upholstery to seat assembly.

3/8" x 1-1/2" (4)

Use 9/16" socket to

tighten nut and 5/32"

hex key to install sleeve

MTS HIGH ROW Assembly Instructions

3/8" x 1-1/2"

UPHOLSTERY

3/8" x 2-1/2"

UPHOLSTERY

BOLT