Setting Draper Pressure Alarm - MacDon DWA Operation And Parts Manual

Double windrow attachment for m1-series self-propelled windrowers

Hide thumbs Also See for DWA:

Table of Contents

4. Scroll to the One-Touch-Return icon (A), press the HPT

scroll knob (B) or the GSL select button (not shown) to

open the headland management menu list (B).

NOTE:

The F2 shortcut button on the operator's console

also will open the One-Touch-Return menu

list (B).

To program the One-Touch-Return buttons, press and hold

button "A", "B", or "C" on the GSL handle for 3 seconds

until an audible tone is heard, indicating the current header

settings are saved to that button.

The One-Touch-Return buttons will always save header

height settings, but you can also save the following settings

for the DWA:

• DWA up/down

• DWA speed

Refer to your windrower operator's manual for more

detailed One-Touch-Return information.

2.6.2 Setting Draper Pressure Alarm

1. Press the scroll knob (A) on the Harvest Performance

Tracker (HPT) or the select button (B) on the ground

speed lever (GSL) while in any run screen to open the

QuickMenu system.

214048

ASSEMBLY/SETUP INSTRUCTIONS

Figure 2.29: One-Touch-Return Icon and

One-Touch-Return Menu List

Figure 2.30: One-Touch-Return Buttons on the

GSL

Figure 2.31: HPT Scroll Knob and GSL

Select Button

Revision A

Table of Contents