VGA
Initializing VGA
–
Select the target panel from the Flat Panel drop-down menu.
–
Click <Get> for each item to obtain the current value.
Backlight Attribute Settings
–
For frequency, click the Set/Get option to set/get the desired value.
–
For polarity, click Yes or No to turn the polarity on/off. If the polarity cannot be
controlled, the Yes and No buttons will be unclickable.
Backlight On/Off
–
For Backlight Control option, click On or Off to turn the backlight on/off. If the
backlight function cannot be controlled, the On and Off buttons will be
unclickable.
–
Click <Get> to view whether the current status is On or Off.
Brightness Adjustment
–
For the Backlight Brightness Control option, click the PWM/ACPI button to
set the brightness control method. If the backlight control method cannot be
configured, this option will not be clickable.
–
Slide the seekbar to adjust the brightness value.
–
Click <Get> to obtain the current brightness value.
MIO-2270 User Manual
50