Hazardous Safety And Warning Information; Safety Labels On The Instrument & Battery Pack; Symbols Used - Teledyne GAS LASER Operator's Manual

GAS LASER
Warnings & Definitions

Hazardous Safety and Warning Information

WARNING
WARNING: Do not use the
instrument in hazardous areas
except those areas and zones for
which it is approved.
WARNING: To reduce the risk
of ignition of a flammable or
explosive atmosphere, batteries
must be removed, inserted and
recharged only in a location known
to be non-hazardous. Use only
Battery Pack.
replaceable 105756
Battery Charger is not part of the
hazardous safety certification.
Safety Labels on the Instrument & Battery Pack

Symbols Used

Caution
Consult instructions for
use
IP54
Ingress Protection
Doc No. 16162 Rev A, GAS LASER Operator Manual
WARNING: Do not disassemble
or open or modify this instrument
including the battery pack.
105756
All repairs must be done only by
an authorized facility as listed in
this manual.
WARNING: Do not disassemble, do
not short, do not burn or expose to
high temperature ( ≥ 60° C/140° F)
the Lithium battery pack used with
this instrument. Use the designated
charger to charge the battery only
in non-hazardous area.
Do not dispose of this prod-
uct in the unsorted munic-
ipal waste stream. Dispose
of this product according to
local regulations.
Lithium Ion battery
6
Operator's Manual
WARNING: Do not connect to
USB port in a Hazardous area.
Only connect to a USB equipment
certified to appropriate safety
standards such as IEC 61010-1 or
equivalent in a non-Hazardous
area.
WARNING: Substitution of
components may impair intrinsic
safety. No user serviceable
components contained within this
instrument.
Measurement IR Laser
Radiation: Class I Visible
(Green) Laser Radiation:
Class 2(II)
Do not stare into beam.
Avoid direct eye exposure.
© 2021 Teledyne Gas Measurement Instruments Ltd. All rights reserved.