File Access; Usb File Transfer - Teledyne GAS LASER Operator's Manual

GAS LASER

File Access

The Gas Laser stores data on an internal SD memory card. The data files can be
downloaded or accessed in the following ways:

- USB File Transfer

(details below)
USB File Transfer
To access recorded/captured data:
1. Turn on instrument.
2. Use the provided USB 2.0 A
to Micro-B cable to connect the
instrument to the PC.
a. Plug the Micro-B end into the
port on the instrument while
powered on.
b.
Plug the USB 2.0 A end into
the USB port of the PC.
3. A file explorer window should
open automatically when the
device is ready for access, or
simply browse the PC's devices
and drives to locate the instru-
ment's USB drive.
Basic folder
and file structure:
Daily
Folders
Captures Datalogs
Folder Folder
Capture Data Log
Image File
.bmp .txt
Capture
Log File
.txt
Doc No. 16162 Rev A, GAS LASER Operator Manual
NOTICE
NOTICE: Recognition of Gas Laser may take some time on first plug in as
the required drivers are installed. Please allow time for this initial process
to complete.
Root
Folder
Peaks SELF_TEST
Folder Folder
Peak Log SELF_TEST
File Log File
.txt
.txt
- WiFi connection to Configuration Portal
(see page 23)
<USERNAME>-<FILETYPE>.<EXT>
Diagnostics
SERIAL number of instrument
Folder
DATE of file creation (YYMMDD)
TIME of file creation (HHMMSS)
USERNAME of user that was
Startup
logged on (always ADMIN for FR)
Log File
.txt
FILETYPE is the file type name:
Fault
Log File
.txt
EXT is the file extension
22
© 2021 Teledyne Gas Measurement Instruments Ltd. All rights reserved.
Operator's Manual
b.
Plug the USB end into the
USB port of the PC.
a.
Plug the Micro-B end into the
instrument while powered on.
File Name Conventions
<SERIAL>-<DATE>-<TIME>-
Capture(Log)
Selftest
Datalog
Peaks
Startup
Fault
.bmp for Capture images
.txt for log files