Configuration Portal - Teledyne GAS LASER Operator's Manual

GAS LASER
File Access
(continued)

Configuration Portal

The Configuration Portal provides users with an easy
interface for accessing files and configuring the instrument.
Navigating to http://10.123.45.1/config will return the
Configuration Portal page.
The configuration portal is divided between two tabs:
- Files is the default tab (shown at right), used for
accessing/downloading data and images saved on
the instrument's internal SD card.
- Instrument (shown below) is the tab that provides
editable fields that identify the operator, timezone
offset, and WiFi information. Both AP and Station mode
credentials are supported.
Name ADMIN
cannot be
changed, but
all other fields
are editable.
Load Config from RMLD
will populate the fields with
the current instrument settings.
Doc No. 16162 Rev A, GAS LASER Operator Manual
NOTICE
When Finished With Configuration Portal:
- Close the web browser
- Disable WiFi AP Mode
NOTICE
Gas Laser firmware is designed by Heath Consultants
for the support of multiple products, therefore the
default name/view is RMLD-FR Configuration Portal.
Save Config to RMLD
must be clicked to update the
instrument with any changes.
24
© 2021 Teledyne Gas Measurement Instruments Ltd. All rights reserved.
Operator's Manual
Timezone
Offset
offers a
drop-down list
for ease of
selection.
Changing the
factory default
AP SSID and
AP Password is
recommended.