Image Screen Mode; Quick Press Features; Long Press Features; Gps Indicators - Teledyne GAS LASER Operator's Manual

Table of Contents

Advertisement

GAS LASER

Image Screen Mode

Displays a live image of
where
the
Gas
Laser
pointed, as well as current
and peak PPMM readings.
This feature is especially useful
in bright sunlight when the green
spotter laser may be hard to see.

Quick Press Features

Turn green spotter laser ON.
Will automatically shut off
after two (2) minutes.
Turn green spotter laser OFF
Set distance alarm to 50'
Set distance alarm to 100'
Add current Peak Hold
value to Peak History List.
Peak History List of
recently held peaks can
be viewed and saved to a
data file through MENU.
A single beep sound upon release
indicates a successful press.

Long Press Features

Saves snapshot and text file
of related data to internal SD
memory. See pages 22-24
for file access instructions.
Opens IMAGE screen mode
A "long press" is achieved by
pressing and holding until a blue
line appears underneath.
GPS Indicator
GPS in the instrument is always
enabled. The GPS icon is only
visible if a GPS signal is locked.

Border Color Indicators

Screen border color indicates
detection status:
- Green, no flashing – no detection
above the alarm level.
- Red, fast flashing – detection exceeds
alarm level methane detected.
Operator may disable flashing
through the MENU.
Doc No. 16162 Rev A, GAS LASER Operator Manual
NOTICE
is
NOTICE:
Reticle is a general representation of IR beam location.
Beam may not be at exact center.
to ensure beam coverage.
Peak Hold:
- Holds until PEAK button is
pressed, or a higher peak is
measured
- Peak History list of recent
holds can be viewed and saved
to a data file through MENU
A blue underline for Camera
icon or MODE indicates a
successful long press.
NOTICE
NOTICE: Border color will not appear while DMD Alarm is disabled.
16
Operator's Manual
Operator must sweep the area of interest
Peak Value:
- Holds for two (2) seconds
before resetting
to a current reading
- Changes instantly
if a higher reading
is measured
Alarm Level Setting:
- May be changed in Menu,
in Alarm Level
© 2021 Teledyne Gas Measurement Instruments Ltd. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents