User Access Levels - Teledyne Meridian User Manual

MERIDIAN
UNIVERSAL GAS DETECTOR
CONFIGURATION & SETUP

5.1.1 User Access Levels

The user levels and their associated privileges are:
• No user access:
- Allows viewing of transmitter information
• Operator access – OA (factory default is 0000):
- Allows viewing of transmitter information
- Allows zeroing and spanning the sensors
• System manager access – SMA (factory default is 0000):
- Allows viewing of transmitter information
- Allows zeroing and spanning the sensors
- Allows changing system parameters
NOTE: User access level determines the display of some parameters.
Access to certain value entry menus and individual parameters are restricted and denoted by RO (Read Only)
located in the top left hand corner of the menu screens. They require a user access. Refer to
tion Menu Structure – Sheet 1 of
mation Menu Parameters to
Information contained herein is classified as EAR99 under the U.S. Export Administration Regulations. Export, reexport or diversion contrary to U.S. law is
5-2
2, Figure 5-2: Configuration Menu Structure – Sheet 2of
Table 5-9: User Access Menu
USE AND DISCLOSURE OF DATA
prohibited.
Parameters.
Figure 5-1: Configura-
2, and Table 5-1: Infor-