Digital Watchdog Snapit DWC-D4365T Manual page 27

SET-UP (SET)
FLUORESCENT
CRR (Color Rolling Reduction)
**Only for NTSC version**
DIGITAL VIDEO OUTPUT
EXIT_JUMP
SAVE & EXIT
EXIT
**Omni-Lens Settings available only in cameras with Moni Lens.**
OMNI LENS**
You can set OMNI LENS menus when you use Omni
Focus Lens.
When OMNI LENS is set ON , you can set the folloing
sub-menus.
- ALARM works with MOTION DETECT fuction.
When motion is deteced, camera gives
an alaram. Select ON or OFF.
- READ TIME is to set how many seconds to stay in
zoom in. Select from 5 to 15 seconds.
- ALARM ZOOM is to set zoom rate when alarm occurs.
Select from 4 to 214.
- STAND BY is the zoom rate when it's normal
scene. Therefore, when alarm
disappear the zoom rate comes back
to STAND BY rate. Select from 0 to 214.
- CRR1 If you use a manual lens, select CRR1 to release
Rolling/Flicker problem.
- CRR2 If you use a DC lens, select CRR1 to release
Rolling/Flicker problem.
- DIGITAL OUTPUT (OFF / ON)
- FIELD ORDER (NORMAL / REVERS)
- FRAME RPT (OFF/ 2X / FREEZE)
Exit the OSD after saving the current settings.
Exit the OSD without saving.
27