Digital Watchdog Snapit DWC-D4365T Manual page 25

SYNC (SYC)
EXIT_JUMP
SAVE & EXIT
EXIT
INT1
INT2
Select INTERNAL if camera uses DC power, or
if L/L is not required. Please note this setup
option is only for NTSC version.
**Consult your installer for additional information and
assistance with configuration.**
INT1: SYNC to 59.94Hz
INT2: SYNC to 60.01Hz
In PAL, INT1 & INT2 SYNC to 50.00Hz.
LL (Line Lock)
Select L/L to syncronize video signals when two or
more cameras are using AC power in a switching
system.
Exit the OSD after saving the current settings.
Exit the OSD without saving.
25