Digital Watchdog Snapit DWC-D4365T Manual page 21

DAY NIGHT (D&N)
D&N MODE
BW BURST**
EXIT_JUMP
Go to the Exit menu to save & exit, or exit without saving
**BW BURST available only if Day/ Night Mode is set to AUTO.**
AUTO If AUTO is selected, the camera will automatically switch between color
and B/W depending on the levels of light available. The camera will stay
in color mode when there is enough light. The camera will switch to
B&W at night or other low light environments.Please define the following
settings:
READ TIME (3~255): Time interval delay before switching from day mode
to night mode. It is adjustable from 3 seconds to 255 seconds.
S LEVEL (Color -> B/W) (0~60): Adjusts the light level at which the
camera switches from day (color) to night (B&W) mode. The higher the
number, the lower the light level.
E LEVEL (B/W -> Color) (0~60): Adjusts the light level at which the
camera switches from night (B&W) to day (color) mode. This number
should be lower than the value of COLOR->B&W above.
BW AGC (0~60): You can fix the Gain levels when the camera switches
between Color and B/W.
COLOR
Camera always stays in day mode.
BW
Camera always stays in night mode.
OFF Remove BURST when converting to B/W.
ON Output BURST when converting to B/W.
21