Subscribe to Our Youtube Channel
Related Manuals for Clarke Strong-Arm CML4
Summary of Contents for Clarke Strong-Arm CML4
- Page 1 HYDRAULIC MOTORCYCLE LIFT MODEL NO: CML4 PART NO: 7610191 OPERATION & MAINTENANCE INSTRUCTIONS LS0611...
-
Page 2: Specifications
GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase. -
Page 3: Safety Precautions
7. ALWAYS inspect the lift before use to ensure it is in good condition, and replace any damaged or worn parts. 8. ALWAYS use spare parts supplied by Clarke International. Using non- standard parts could be extremely dangerous. 9. ENSURE the operator is trained in both operational and safety aspects. -
Page 4: The Ram Assembly
OVERVIEW ASSEMBLY THE RAM ASSEMBLY 1. Secure the ram assembly to its baseplate using the two M8x25 bolts and M8 Spring washers supplied. 2. Tighten the bolts securely. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 5: The Locking Bar
THE LOCKING BAR 1. Locate the locking bar handle in to the socket at each side of the lift. 2. Place a M8 spring washer on to the threads and screw on the M8 nut securely. • Ensure the locking bar is free to rotate under its own weight. -
Page 6: The Handle And Operating Pedal
THE HANDLE AND OPERATING PEDAL The handle is secured to the frame using the pin provided. The operating pedal should be slid into place and secured using the M8x12 bolt supplied. OPERATION RAISING THE LOAD 1. Position the saddle between the wheels of the motorcycle, as near to the centre of gravity as possible. - Page 7 3. When the motorcycle is satisfactorily supported, screw down the two stabilisers, • This removes any load from the castors, 4. Raise the load by pumping the operating pedal. 5. Once you have reached the desired height, ensure the locking bar is engaged with the notches on the base, 6.
-
Page 8: Lowering The Load
If necessary, consult your Clarke dealer. If the Warning label becomes illegible, have it replaced. Contact your Clarke dealer. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 9: Parts List
PARTS LIST ESCRIPTION ART NUMBER ESCRIPTION ART NUMBER FRONT WHEEL TATACML401 SCREW TATACML415 BASE ASSEMBLY TATACML402 SPRING TATACML416 SADDLE TATACML403 FLAT WASHER TATACML417 LEFT LIFTING ARM TATACML404 RIGHT LIFTING TATACML418 ASSEMBLY ARM ASSEMBLY NUT M8 TATACML405 RELEASE PEDAL TATACML419 SPRING WASHER M8 TATACML406 BOLT M8 x 25 TATACML420... -
Page 10: Part Diagram
PART DIAGRAM Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 11: Declaration Of Conformity
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the Strong-Arm CML4 and is the answer not in the manual?
Questions and answers