Related Manuals for Clarke Strong Arm HTL 300
Summary of Contents for Clarke Strong Arm HTL 300
- Page 1 HYDRAULIC MOBILE HYDRAULIC MOBILE LIFTING TABLE LIFTING TABLE MODEL Nos. HTL300 & HTL500 OPERATING & MAINTENANCE INSTRUCTIONS 0611...
-
Page 2: Specifications
Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice. NOTE: When de-commissioning this equipment, ensure the oil is drained completely and disposed of according to local ordinances/regulations. -
Page 3: Safety Precautions
Thank you for purchasing this CLARKE Mobile Hydraulic Lifting Table, designed for the quick and convenient raising of components or equipment in and around a workshop. All authorised users must read this leaflet thoroughly and carefully follow the instructions given. This will ensure the safety of the operator and that of others in the vicinity, and you can also look forward to the Lifting Table giving long and satisfactory service. -
Page 4: Operation
ASSEMBLY Lower the Handle into the holes in the frame and secure, each side, from below, with the bolt (64), spring and flat washers (63 & 62), provided. Insert Foot Lever (59) into its Socket at the end of lever (60). Insert Pin (42) and secure with washers (6 &... -
Page 5: Maintenance
• Check the action of the hydraulic ram and inspect for leaks. If leaks are apparent, DO NOT USE THE LIFT, but submit for repair. (Contact your Clarke dealer). NOTE: ALL major repairs MUST be re-tested according to ANNEX C regulations and should therefore be carried out by your CLARKE dealer. -
Page 6: Parts Diagram
PARTS DIAGRAM... -
Page 7: Parts List
Bush ZJ30035 Mesh Guard ZJ30067 PARTS and SERVICE CONTACTS For Spare Parts and Service, please contact your nearest dealer, or CLARKE International, on one of the following numbers. ARTS & SERVICE TEL: 020 8988 7400 e-mail as follows: PARTS: Parts@clarkeinternational.com SERVICE: Service@clarkeinternational.com... - Page 8 PARTS DIAGRAM - RAM...
- Page 9 PARTS LIST - RAM No. Description Qty Part No. No. Description Qty Part No. 24 Steel Ball ZJ300R24 O-ring 22x2.65 ZJ300R01 25 Spring ZJ300R25 Pump cylinder (300) I ZJ300R02 26 Steel ball ZJ300R26 Pump cylinder (500) I ZJ500R02 27 Screw ZJ300R27 Seal ring (300) ZJ300R03...
- Page 10 GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase.
Need help?
Do you have a question about the Strong Arm HTL 300 and is the answer not in the manual?
Questions and answers