Subscribe to Our Youtube Channel
Related Manuals for Clarke Strong Arm CML2
Summary of Contents for Clarke Strong Arm CML2
- Page 1 HYDRAULIC MOTOR CYCLE LIFT Model: CML2 Part No: 7610142 OPERATING & MAINTENANCE INSTRUCTIONS 1000...
-
Page 3: Safety Precautions
GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. -
Page 4: The Ram Assembly
UNPACKING Lay out the components carefully, and check to ensure that no damage has occurred during transit. Any damage should be reported to your Clarke dealer immediately. Fig.1 Loose components comprise: a. Base Assembly b. Ram Assembly Locking Bar d. Frame... -
Page 5: The Locking Bar
2. The Frame: Ref: Fig.3 Fig.3 Remove the pin, securing the ram to the frame, if fitted. Place a flat washer on the Frame securing bolt (A), then thread the bolt through the hole in the base assembly bracket, and have an assistant hold it in place. -
Page 6: Operation
4. The Ram to Frame. Line up the holes in the mounting bracket and ram, then locate the ram using the pin previously removed and secure using the split pin provided. NOTE: It may be necessary to push the ram into the cylinder, in order to line up the holes. To do this, press down on the Release Pedal, (see Fig. -
Page 7: Maintenance
Lift from service, and have it inspected and repaired by a qualified technician before putting back into use. If necessary, consult your Clarke dealer. If the Warning label becomes worn or illegible, have it replaced. Contact your Clarke dealer. -
Page 8: Parts List
19. Bolt M8xl0 HTCML219 PARTS AND SERVICE CONTACTS For Spare Parts and Service, please contact your nearest dealer, or CLARKE International, on one of the following numbers. PARTS & SERVICE TEL: 020 8988 7400 PARTS & SERVICE FAX: 020 8558 3622 e-mail as follows: PARTS: Parts@clarkeinternational.com... -
Page 9: Parts Diagram
PARTS DIAGRAM...
Need help?
Do you have a question about the Strong Arm CML2 and is the answer not in the manual?
Questions and answers