Related Manuals for Clarke CEC500DS
Summary of Contents for Clarke CEC500DS
- Page 1 ENGINE SUPPORT MODEL NO: CEC500DS PART NO: 7612912 USER & MAINTENANCE INSTRUCTIONS GC0813...
-
Page 2: Specification
INTRODUCTION Thank you for purchasing this CLARKE Engine Support, designed to support and position engines during maintenance operations such as replacing anti- vibration mountings and as an aid to removing transmissions. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. -
Page 3: General Safety Rules
15. Inspect the engine support before use to ensure it is in good condition. Replace any damaged or worn parts. 16. If replacing parts, only use those supplied by Clarke International. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 4: Product Overview
PRODUCT OVERVIEW DESCRIPTION DESCRIPTION Support Beam Chain Washer (large hole) Lifting Hook Washer (small hole) Support Block Knob Bolt (M12 x 25) End Plate Handle Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 5: Operation
ASSEMBLY 1. Attach the support blocks (8) to the end plates (5) with the bolts (9). 2. Slide the threaded end of the support blocks through the channel inthe support beam (1). As it emerges, place a washer (3) onto the thread and screw on the knob (4), but do not tighten down. -
Page 6: Maintenance
3. If possible, attach the chains provided, directly onto the engine lifting points. Refer to the manufacturers handbook to identify the attachment points. 4. Otherwise, attach an appropriate sling or chain to the engine lifting points, and then attach these to the chain provided. Wrap the chain around the lifting hooks. -
Page 7: Declaration Of Conformity
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CEC500DS and is the answer not in the manual?
Questions and answers