Subscribe to Our Youtube Channel
Related Manuals for Clarke STRONG-ARM HTL300
Summary of Contents for Clarke STRONG-ARM HTL300
- Page 1 HYDRAULIC MOBILE LIFTING TABLE MODEL NO: HTL300 & HTL500 PART NO: 7610148 & 76210152 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1116...
-
Page 2: Technical Specifications
INTRODUCTION Thank you for purchasing this CLARKE Mobile Hydraulic Lifting Table, designed for the quick and convenient raising of components or equipment in and around a workshop. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Safety Precautions
Only use the product for the purpose for which it is intended. 5. Do not use if an oil leak is apparent. Consult your Clarke dealer. 6. Check the condition of the labels regularly and replace as required. Labels are provided in accordance with BSEN1570. -
Page 4: Safety Symbols
4. Never alow hands or feet to be placed under the platform within the range of movement of the scissor lift components. Take care not to trap fingers in the moving parts. 5. Always ensure when lifting, that all parts of the load can be clearly seen. 6. -
Page 5: Before Use
BEFORE USE UNPACKING Obtain the assistance of a second person when unpacking the lifting table from its packaging. Alternatively, cut and fold down one end of the box and wheel the lifting table out. ASSEMBLY Lower the handle into the holes in the frame and secure each side from below with the bolt (64), spring, and flat washers (63 &... -
Page 6: Operation
OPERATION Before raising or lowering the table: 1. Check for any damage or worn parts. Do not use the lifting table unless it is perfectly serviceable. 2. Lock the castor brakes before loading the table. (A brake is provided on each castor for safety). -
Page 7: Maintenance
2. Check the action of the hydraulic ram and inspect for leaks. If leaks are apparent, DO NOT USE THE LIFTING TABLE, but submit for repair. (Contact your Clarke dealer). Always make every effort to contain any escape of oil and prevent ingress into the local water course. -
Page 8: Troubleshooting
(44) If any of these remedies fail to restore your lift table, consult your Clarke dealer STORAGE Store in a dry place with the ram fully lowered to minimise ram and piston corrosion. If stored for long periods, inspect at least once a year, clean and re- oil. -
Page 9: Decommissioning The Product
DECOMMISSIONING THE PRODUCT Should the product become completely un serviceable and require disposal, draw off the oil into a suitable container and dispose of the product and the oil at an approved recycling centre, according to local regulations. Take care to ensure that any spilled hydraulic oil is cleaned away using sand, or treated with absorbent granules designed for the purpose. - Page 10 HYDRAULIC RAM COMPONENT PARTS...
- Page 11 HYDRAULIC RAM COMPONENT PARTS PART NO DESCRIPTION PART NO DESCRIPTION O-ring 22x2.65 Screw Pump Cylinder Strike Pin (HTL300 or 500) Sealing Ring O-ring 6.9x1.8 (HTL300 or 500) Dust Ring Shaft (HTL300 or 500) Pump Plunger Filter (HTL300 or 500) Spring O-ring 65x3.55 Spring Seat Sealing Ring...
- Page 12 TABLE & FRAME COMPONENT PARTS PART NO DESCRIPTION PART NO DESCRIPTION Handlebar L-Pin Pull Rod Screw Screw Inner Lifting Arm (HTL300 or 500) Bolt Cushion Washer Bolt Washer Circlip Washer Washer Roller Swivelling Caster Wheel Washer Frame Pedal Bar Axle Roller Cover Circlip...
- Page 13 TABLE & FRAME COMPONENT PARTS...
-
Page 14: Declaration Of Conformity
DECLARATION OF CONFORMITY... - Page 15 NOTES __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________...
Need help?
Do you have a question about the STRONG-ARM HTL300 and is the answer not in the manual?
Questions and answers