Table of Contents
Related Manuals for Okolab H201-MINI
Summary of Contents for Okolab H201-MINI
- Page 1 User Manual H201-MINI April 2015 H201-MINI Compatible with the following XY stages Compatible with the following Okolab Controllers • • Physik Instrumente: P-737.1SL/2SL/5SL H201-T-BL-PLUS • It fits in any MW plate holder www.oko-lab.com...
-
Page 2: Table Of Contents
User Manual H201-MINI April 2015 Index Components and dimensions....................3 Sample Holders ........................4 Available Sample Holders ....................4 Insertion of the Sample Feedback Temperature Sensor ..............4 Insertion of Sample Holder into Chamber ................... 5 Working with 35 or 60 mm Petri Dish – Spacing Rings and Magnetic Locks ........... 5 Working with 1x3’’... -
Page 3: Components And Dimensions
H201-MINI includes the following components: • Chamber main body • Glass lid Distance between focal plane and upper side of the glass Sample Holder - Order Separately Chamber top view Chamber Base Figure 1. H201-MINI - Components and Dimensions. www.oko-lab.com... -
Page 4: Sample Holders
#2 35mm petri dishes Figure 2.Available sample holders. 3. Insertion of the Sample Feedback Temperature Sensor Insert the Sample Feedback Temperature Sensor through the dedicated opening located in the H201-MINI (see Figure 3, Frontal and 3D views). Temperature Sensor dedicated opening Temperature Sensor dedicated opening 1.Frontal view... -
Page 5: Insertion Of Sample Holder Into Chamber
User Manual H201-MINI April 2015 4. Insertion of Sample Holder into Chamber Sample holders fit into the chamber base and are held in place by magnets embedded within both chamber and hold- er. To introduce a sample holder with the proper orientation, match the red dot on the holder to the one on the chamber base, as illustrated in Figure 4. - Page 6 User Manual H201-MINI April 2015 Figure 6. 1) Insertion of the ring, 2) insertion of the 35 mm dish, 3) insertion of the magnetic lock. NOTE: Spacing rings are included with sample holder. Ibidi μ-Dish35mm-low Grainer-Petri35x10 Corning-35x10mm MatTek-P35G-X-14-X BD Falcon-35x10 Willco-35x10 Figure 7.
-
Page 7: Working With 1X3'' And 1X2'' Chamber Slides - Magnetic Locks
User Manual H201-MINI April 2015 6. Working with 1x3’’ and 1x2’’ chamber slides - magnetic locks Magnetic locks prevent movement of 1’’x 3’’ and 1’’x 2’’ chamber slides inside of the sample holder. NOTE: Magnetic locks are included with sample holder. -
Page 8: Connection Of The Gas Supply
A single silicon tubing carries output gas from the Okolab Gas Controller to the H201-MINI. Silicon tubing connects to a gas input - brass opening - located on a corner of the H201-MINI. See Figure 11. Connect by gently pushing silicon tub- ing onto brass opening. -
Page 9: Connection Of The Chamber With Xy Stage
9. Connection of the Chamber with XY stage H201-MINI fits on the XY Stage without any screws. To fix the chamber on the stage, follow the steps shown in Figure Place the chamber on the stage (See Image 1 of Figure 13).