Chapter 2 Configuring and Upgrading the System
2.5.3 Creating and Mounting a Filesystem
Create a file system (VMFS data store) to a RAID device you have built.
1. Open vSphere Client and log in to the ESXi host.
2. Select the Configuration tab for the ESXi host.
3. Select Storage in the Hardware box.
4. Select Add Storage.
Note
When configuring RAID device using esxcli storage mpm create command, some
data remains unerased, and the existing VMFS datastore may be displayed on datastore
list. In this case, erase the existing datastore, then create a new datastore.
Express5800/R320d-E4, R320d-M4 Maintenance Guide (VMware 5.5)
2. Disk Operations
103