Table of Contents
Advertisement
Chapter 1 Maintenance
Change of SNMP Community
→ If the security setting of the SNMP Service of a system, where NEC ESMPRO Agent is installed, is
changed from the default "public" to a community name, change the community settings of NEC
ESMPRO Agent, too.
1. Log in as a root user.
2. Move to the directory where the control panel of NEC ESMPRO Agent is stored.
# cd/opt/nec/esmpro_sa/bin
3. Start the control panel.
# ./ESMagntconf
The Control Panel window appears.
4. Click [General].
The [General Properties] window appears.
5. Select a SNMP community name used when you retrieve local machine information
in the [SNMP Community] box. (Select by "↑" key or "↓" key.)
6. Click [OK] to quit.
The Detail Information of Alert
→ Detail information of some alert displayed on the alert viewer may be displayed as "Unknown."
File System Monitoring Function
→ vmfs area is not monitored.
Change Settings of File System Monitoring Function
→ New settings in thresholds of monitoring interval and free space monitoring are not reflected
immediately after they are changed. They are reflected at the next monitoring interval of
monitoring service.
CPU Load Ratio of snmpd Service
→ While monitoring the server from NEC ESMPRO Manager, the CPU load ratio of snmpd Service
on NEC ESMPRO Agent side may increase at every monitoring interval (default: 1 minute).
NEC ESMPRO Manager and NEC ESMPRO Agent exchange information through snmpd Service.
If the server status monitoring by NEC ESMPRO Manager is on (default: ON), NEC ESMPRO
Manager regularly issues a request to NEC ESMPRO Agent to get the current status of the server.
In response, NEC ESMPRO Agent checks the status of the server. As a result, the CPU load ratio
of snmpd Service increases temporarily.
If you have trouble of terminating a movie player application, turn off the server status monitoring
by NEC ESMPRO Manager or extend the monitoring interval.
Hang of snmpd Service
→ Snmpd Service has a module called "SNMP Extended Agent." This module may be registered
when you install some software that uses snmpd Service.
If you start snmpd Service, SNMP Extended Agent is also loaded at the initialization. However, if
the initialization is not completed within a specified period, snmpd Service will hang. It may take
time to complete the initialization due to temporary high load on the system. In this case, wait for
the system load become low enough before restarting snmpd Service.
76
Express5800/R320d-E4, R320d-M4 Maintenance Guide (VMware 5.5)
8. Troubleshooting
Advertisement
Table of Contents
