Table of Contents
Advertisement
Chapter 1 Maintenance
(8)
EXPRESSSCOPE
If any module fails, LED on EXPRESSSCOPE relevant to the failed module lights in amber.
(1) Module POWER LED
LED indication
On (green)
Off
Blinking (green)
(2) SAFE TO PULL (SAFE TO PULL LED)
This LED indicates the possibility to remove CPU/IO module safely.
LED indication
On (green)
Blinking (green)
Off
(3) Module ID (ID LED)
The Module ID LED is used for identifying the device that requires maintenance among devices mounted
on the rack.
LED indication
On (green)
Blinking (green)
Off
52
(1)
(2)
(3)
(4)
(5)-1
(11)
(10)
Description
The power of CPU/IO module is ON.
The power is not supplied to CPU/IO module.
The CPU/IO module is in standby state.
Description
The CPU/IO module can be removed.
The CPU/IO module cannot be removed.
The CPU/IO module is in off line state.
Description
The UID switch is pressed.
The device identification requests was sent from
remote site.
–
Express5800/R320d-E4, R320d-M4 Maintenance Guide (VMware 5.5)
(5)-2
(5)-3
(5)-4
(9)
(8)
(7)
(6)
–
–
–
–
–
–
–
–
–
6. Error Messages
Action
Action
Action
Advertisement
Table of Contents
