Download  Print this page

Atm Line Card Product Numbers; Router Hardware Installation; Cisco Ios Software Release Requirements; Important Information - Cisco 12000 Series Installation And Configuration Manual

Cisco systems atm line card installation and configuration
Hide thumbs

Advertisement

Table of Contents

Important Information

ATM Line Card Product Numbers

Table 1
Table 1
ATM Line Card
1-port OC-12c/STM-4c multimode
1-port OC-12c/STM-4c single-mode
4-port OC-3c/STM-1 multimode
4-port OC-3c/STM-1 intermediate-reach
4-port OC-12c/STM-4c multimode
4-port OC-12c/STM-4c intermediate-reach
8-port OC-3c/STM-1 multimode
8-port OC-3c/STM-1 intermediate-reach
4-port OC-3c/STM-1 ISE multimode
4-port OC-3c/STM-1 ISE intermediate-reach
4-port OC-12c/STM-4c ISE multimode
4-port OC-12c/STM-4c ISE intermediate-reach

Router Hardware Installation

For hardware installation and configuration information for Cisco 12000 series routers, refer to the
installation and configuration guide for your router. The guide includes information on the router switch
fabric and its affect on operation of the line card, as well as line card slot locations and other
requirements.
Supported Platforms
The ATM line card is supported on all Cisco 12000 series routers.
The installation procedure of the 4-port ISE ATM line card in the Cisco 12008 and Cisco 12012 Routers
Note
is slightly different than that for other routers in the series. Take note of the differences in the installation
sections.

Cisco IOS Software Release Requirements

For software configuration information, refer to the Cisco IOS software configuration and command
reference publications for the installed Cisco IOS software release. Also, refer to the Cisco IOS software
release notes for additional information.
ATM Line Card Installation and Configuration
2
Hardware Revision Requirements, page 3
Related Documentation, page 4
lists the Cisco product numbers to which this publication applies.
ATM Line Card Product Numbers
Cisco Product Number
LC-1OC12/ATM-MM=
LC-1OC12/ATM-SM=
4OC3/ATM-MM-SC=
4OC3/ATM-IR-SC=
4OC12/ATM-MM-SC=
4OC12/ATM-IR-SC=
8OC03/ATM/TS-MM=
8OC03/ATM/TS-IR=
4OC3X/ATM-MM-SC=
4OC3X/ATM-IR-SC=
4OC12X/ATM-MM-SC=
4OC12X/ATM-IR-SC=
OL-13004-01

Advertisement

Table of Contents
loading

  Related Manuals for Cisco 12000 Series