Cisco 12000 Series Installation And Configuration Manual page 54

Cisco systems atm line card installation and configuration
Hide thumbs Also See for 12000 Series:
Table of Contents

Advertisement

Line Card Memory
As the SODIMM is released, it positions itself at a 45-degree angle
Step 6
SODIMM module from the socket. Continue to keep the module at a 45-degree angle until it is
completely removed from the socket guides
Touch the edges of the SODIMM only. Do not touch the integrated circuit devices on the SODIMM, the
Caution
metal traces, or fingers, along the edge of the SODIMM, or the pins in the SODIMM socket.
Figure 26
On 4-port OC-3c/STM-1 ISE and 4-port OC-12c/STM-4c ISE line cards, take care that when you remove
Caution
the SODIMM module in the SODIMM1 memory socket, it does not touch the SODIMM module
installed in SODIMM0 memory socket
Figure 27
1
SODIMM0 memory socket and
module
Step 7
Immediately place the SODIMM in an antistatic bag to protect it from ESD damage.
ATM Line Card Installation and Configuration
54
Removing a 144-pin SODIMM Module
a
(Figure
Removing the SODIMM1 Memory Module
1
2
2
(Figure
(Figure
26b).
b
45 º
27).
SODIMM1 memory socket and
module
26a). Gently pull out the
45 º
OL-13004-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents