Menu 6.4 - Configuring The Blockage Detection [ ] - RADEMACHER 3650 05 12 Assembly Manual

21.4 Menu 6.4 - Configuring the blockage detection [ ]

Brief description of the blockage detection
The SpeedTimer is able to monitor the torque of motors equipped
with mechanical end point setting. This enables the controller to
switch off the motor in the event of overloading or blockage. As a
result, the roller shutter is protected from damage.
i The blockage detection can only be used in combination
with a mechanical tubular motor.
42
1. Select and open menu
"6.4" [ ] "Blockage
detection".
2. Activate or deactivate
the blockage detec-
tion and confirm.
On = Blockage detection
on
OFF = Blockage detection
off
OK
OK
> Continue with point 3.
> Back to system menu
EN