i
10. Important information prior to the electrical connection and installation
The installation and elec-
trical connection may only
be undertaken using the
enclosed installation hou-
sing (13).
The connecting terminals
(14) are located on the
bottom of the installation
housing.
13.
14.
You must configure the end stops of the tubular motor
prior to installation and before making the final electrical
connection.
◆ If no end stops are configured, then it is vital that both end
points of the tubular motor are configured, as failure to do
so can lead to malfunctions.
◆ In order to do so, follow the information provided in the
operating manual for the respective tubular motor.
EN
13