Table of Contents
Advertisement
21.4 Menu 6.4 - Configuring the blockage detection [ ]
Automatic reversing in the event of a blockage.
In the event of a blockage, the motor runs in the opposite direction
for approx. 2 seconds in order to release the obstacle or to take
the strain off the roller shutter.
i
Some motors can trigger undesired reversing when reaching
the end positions. (For example, atypical internal motor
loads, long leads, etc.). In such cases it is recommended to
deactivate the reversing function.
6.
As soon as the previous
setting is confirmed,
the "System settings"
menu is displayed
again.
EN
45
Advertisement
Table of Contents
