RADEMACHER 3650 05 12 Assembly Manual page 26

17. Opening and closing times [ ]
◆ SENSOR
The closing time is controlled by a light sensor in
relation to the level of brightness.
In addition, the measured dusk value is linked to the previ-
ously configured closing time.
In doing so, the previously configured time is interpreted as
"latest at xx:xx hours".
Example:
If, for example, 20:00 hours is configured as the closing time,
then the roller shutter would close at approximately 17:00
hours during the winter months (due to the shorter days).
However, during the summer months, the roller shutter
would close at 20:00 hours at the latest, even if this is
before dusk.
26
Configuring opening and closing times with an active
week programme
If the week programme is activated (see page 41), it is
possible to configure customised opening and closing times for
every day of the week. In this case, the respective weekday e.g.
"Mo." (Mon) is shown on the display instead of "Mo. .... So."
(Mon .... Sun).
Switching time mode is only configurable for Monday [Mo].
A closing time mode (NORMAL, ASTRO, SENSOR) can only be
selected for the configuration of the closing time (Down)
for Monday.
This switching time mode applies to the entire week.
This means that it is then not possible to change the switching
time mode when configuring the closing times for Tuesday (Di -
Tues) to Sunday (So - Sun).
EN