21.4 Menu 6.4 - Configuring the blockage detection [ ]
i
Test runs should be made to ascertain the highest possible
level of sensitivity, in order to protect the roller shutter in the
event of blockage.
More information about the blockage detection:
◆ If longer connecting leads are used (>5 m), it is possible
that the blockage detection will fail to work correctly due
to external interference.
◆ The end points may shut off some motors with mechanical
switch-off because a blockage has been detected. Blockage
detection must be deactivated for this type of motor.
44
5.
Activating / deactivating
reversing after a block-
age is detected.
On = Reversing on
OFF = Reversing off
i
A brief description of
the function is provid-
ed on the following
page.
OK
EN