Table of Contents
Advertisement
18.1 Menu 3 - Customising the automatic dusk function [ ].
3.2
Customising the offset
in [ASTRO] switching
time mode.
The offset function can be
used to change the clos-
ing time of the automatic
dusk function by +/- 60
minutes.
3.2.1
Continue to display the
calculated dusk time,
including the offset.
3.2.2
Back to main menu
32
Example
With a negative offset, for exam-
ple, "- 10", the roller shutter will
close approx. 10 minutes earlier
than the previously configured
closing time.
OK
OK
3.3
Customising the dusk
limit value in [SENSOR]
switching time mode.
If the set limit is not met
due to the onset of dusk,
the roller shutter will
close.
Setting range:
1 = 2 lux
15 = 50 lux
3.3.1
Back to main menu
ACTUAL value
Measured brightness.
- -
"
"= too bright
Configurable set limit
1 = very dark
15 = less dark
OK
EN
Advertisement
Table of Contents
