19.3 Menu 9.6 - Configuring the blockage detection
The Troll Standard is able to monitor the torque of motors equipped
with a mechanical end point setting. This enables the controller to
switch off the motor in the event of overloading or blockage. As a
result, the roller shutter is protected from damage.
i
1.
2.
3.
44
Blockage detection can only be used in combination
with a tubular motor with mechanical end point setting.
Open menu 9.6.
Activate/deactivate the blockage detection
and confirm.
On = blockage detection on *
Off = blockage detection off **
*
** After deactivation and confirmation the
Select and confirm the suitable
motor type.
A list of the motor types is provided
on the following page.
Please also read the instruction manual for the
tubular motor being used.
Continue with point 3.
display jumps back to the menu..
EN