Schedule For Engines In Normal Use - Perkins 3000 Series User Handbook Manual

4

Schedule for engines in normal use

The preventive maintenance operations must be applied at the interval (hours or months) which occurs first.
A - Every 10 hours or daily
B - Every 400 hours or 12 months
C - Every 1200 hours or 24 months
A B C
l
Check the amount of coolant
l
Check the level of the lubricating oil
l
Check the restriction indicators for the air filters and, when necessary, renew the filter
elements
l
Drain the water/sediment from the primary fuel filter
l
Check the condition and the tension of all drive belts
l
Check the specific gravity and the pH value of the coolant
l
Renew the lubricating oil
l
Renew the canisters of the lubricating oil filter
l
Renew the canister of the main fuel filter
l
Clean the primary fuel filter
l
Ensure that the mounting nuts for the turbochargers are tightened securely
l
Check that the air charge cooler and the radiator are clean and free from debris
l
Check the timing of the fuel injection pump
l
Check that the drive coupling bolts of the fuel injection pump are tightened to 120 Nm
(88 lbf ft)
l
Ensure that the fuel injectors are checked and corrected or renewed, if necessary*
l
Ensure that the tappet clearances are checked and adjusted, if necessary*
* By a person who has had the correct training.
In addition to the operations listed above, the operations listed below must be applied at 12 month
intervals:
l
Drain and flush the coolant system and renew the coolant mixture
l
Check the turbochargers, ensure that they are checked and corrected if necessary*
l
Ensure that the alternator is checked and corrected if necessary*
16
This document has been printed from SPI². Not for Resale
Operation