Thermo Scientific
Operation
Section 3
To start the Stirrer, follow the procedure below.
(1) Pour the liquids to be mixed into the beaker, or flask.
(2) Place a magnetic stirring bar at the center of the beaker base.
(3) Place a beaker on top of the set-up plate, or plate cover.
(4) Turn the knob clockwise to start stirring.
(5) Adjust the knob clockwise or counterclockwise until the required
stirring speed is achieved.
To stop the Stirrer, follow the procedure below.
(1) After stirring is completed, turn the knob counterclockwise to off.
(2) By inertia, the magnetic stirring bar may continue spinning for a short
time, even if the LED lamp is off.
Do not exceed the maximum load of 10kg for Magnetic Stirrer RT Basic 12, and
20kg for Magnetic Stirrer RT Basic 17, respectively.
Magnetic Stirrer
3-1