Avalue Technology VMS-BYT Quick Reference Manual page 95

B7
#12
B7: 1, Total Vehicle Distance is provided by vehicle ECU
0, Total Vehicle Distance is calculation value
B3~B0:
0000 start not requested
0001 starter active, gear not engaged
0010 starter active, gear engaged
0011 start finished; starter not active after having been actively engaged ?
(after 50ms mode goes to 0000)?
0100 starter inhibited due to engine already running
0101 starter inhibited due to engine not ready for start (preheating)
0110 starter inhibited due to driveline engaged
0111 starter inhibited due to active immobilizer
1000 starter inhibited due to starter over-temp
1001-1011 Reserved
1100 starter inhibited - reason unknown
1101 error
1111 not available
#13 Axle location The value 0xFF indicates not available.
B7
Axle location Bit-mapped position
number counting front to back
facing forward
F = not available
position number, counting front to
back on the vehicle. B7,B6,B5,B4
Axle location Bit-mapped position
number counting front to back
facing forward.
#14 Axle weight 0.5 kg / Bit gain
#15 Axle weight 0.5 kg / Bit gain
Weight=(AWH*256+AWL)*0.5
#16 Engine total hours of Operation, EH1
#17 Engine total hours of Operation, EH2
#18 Engine total hours of Operation, EH3
B6 B5 B4
NOT USED
B6 B5 B4
Quick Reference Guide
B3 B2
Engine Starter Mode
B3 B2
Tire location Bit-mapped counting
left to right facing forward
F = not available
The low order 4 bits represent a
position number, counting left to
right when facing in the direction of
normal vehicle travel
(Low Byte),AWL
(High Byte), AWH
VMS-BYT Quick Reference Guide 95
B1 B0
B1 B0