Table of Contents
Advertisement
8.1 Messages
The table below contains fault and information messages which can appear in the product.
There are references to menus in the product, but Autocheck can also be used in many cases.
Note: Refer to the Operator's manual for more information about how to rectify errors.
Messages
Number
Message
0
No message
1
Outside working area
1413 - 003 - 17.01.2022
8 Troubleshooting
Cause
Indicates that no message is stored.
The boundary wire connections to the
charging station are not installed cor-
rectly.
The work area slopes too much at the
boundary wire.
The boundary wire around an island
is not installed correctly. The boundary
wires are crossed.
The product finds it hard to distinguish
the correct loop signal because of in-
terference with another product instal-
lation nearby.
Interference from metal objects such as
fences, reinforcement steel or buried
cables.
Action
Examine that the left and right sections
of the boundary wire are installed cor-
rectly to the left and right connections
in the charging station.
Examine the installation of the boun-
dary wire is installed according to the
instructions.
Examine that the boundary wire around
the island is installed according to the
instructions. Put the two sections of
boundary wire to and from the island
close together.
Put the product in the charging station
and make a new loop signal.
Move the boundary wire and/or make
islands in the work area to increase the
signal strength.
Troubleshooting - 33
Advertisement
Table of Contents
