Service; Service Schedule - Husqvarna Automower 115H Workshop Manual

Hide thumbs Also See for Automower 115H:
Table of Contents

Advertisement

7.1 Service schedule

The table below contains a checklist of points and actions to be taken when servicing the product.
Action
Firmware update
If firmware is available in Autocheck, update the product with the newest firm-
ware.
Autotest
Diagnostic test of all product functions.
Service messages
Do a check of the service messages for recommended upgrades.
Cleaning
Remove the body of the product. Clean the body of the product, the chassis and
the wheels.
Ventilation filter
Examine the ventilation filter and clean carefully with a soft brush. The ventilation
filter should be replaced after three years of use.
Hatch
Clean the area around the display cover hinge.
Bearings
Examine the rear wheel bearings. Replace if damaged.
Wheels
Examine the front and rear wheels. Replace if damaged.
Body suspension parts
Examine and clean the body suspension parts.
Chassis screws
Do a check of the tightening torque of chassis screws.
Blades
Replace blades and blade screws.
Sealing strips
Every third year, open the chassis and replace all sealing strips.
Cleaning
Clean the charging station by using a wet brush and/or a moist cloth.
Charging plates
Examine and polish the charging plates on the product and the charging plates
on the charging station.
Docking
Check that docking and charging works correctly.
1413 - 003 - 17.01.2022

7 Service

Explanation
Firmware on page 13 .
Refer to
Make a complete Autotest in Au-
Auto test on
tocheck. Refer to
page 13 .
Updated service bulletins can be
found in Autocheck.
To disassemble the body
Refer to
system on page 16 .
To clean and replace the
Refer to
ventilation filter on page 25 .
Refer to
To replace the wheel
motor on page 27 .
To replace the body sus-
Refer to
pension parts on page 25 .
Screw fasteners on page
Refer to
32 .
Maintenance - Replace
Refer to
the blades in the Operator's man-
ual.
To replace the sealing
Refer to
strips on page 28 .
Polish contact surfaces on both
the product and the charging sta-
tion with a fine grade emery cloth.
Symptoms during dock-
Refer to
ing on page 42 and Symptoms
during charging on page 43 .
Service - 31

Advertisement

Table of Contents
loading

Table of Contents