Display back cover
Removing the display back cover
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
microSIM
4. Remove the
base
cover.
5. Remove the
WLAN
card.
6. Remove the
WWAN
card.
7. Remove the
display
assembly.
8. Remove the
display
bezel.
9. Remove the
display
panel.
10. Remove the
camera/microphone
11. Remove the
eDP
cable.
12. Remove the
sensor
board.
13. Remove the
display
hinges.
About this task
The following images indicate the location of the display back cover and provide a visual representation of the removal
procedure.
Steps
After performing the steps in the pre-requisites, we are left with the display back cover.
Installing the display back cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
80
Removing and installing components
before working inside your
card.
card.
module.
computer.