Steps
1. Connect the antenna cables to the WLAN card.
The following table provides the antenna-cable color scheme:
Table 2. Antenna-cable color scheme
Connectors on the WLAN card
Main (white triangle)
Auxiliary (black triangle)
2. Align the notch on the WLAN card with the tab on the WLAN card slot.
NOTE:
When removing the WLAN card from the computer, if the adhesive pad which helps secure the WLAN card in
place is removed from the computer along with the WLAN card, adhere it back to the computer.
3. Slide the WLAN card at an angle into the WLAN card slot.
4. Place the WLAN-card bracket on the WLAN card.
5. Replace the (M2x2.5) screw to secure the WLAN-card bracket to the WLAN card.
Next steps
1. Install the
base
cover.
2. Install the
microSIM
card.
3. Install the
microSD
card.
4. Follow the procedure in
after working inside your
Antenna-cable color
White
Black
computer.
Removing and installing components
21