9. Follow the procedure in
eDP/display cable
Removing the eDP cable
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
microSIM
4. Remove the
base
cover.
5. Remove the
WLAN
card.
6. Remove the
WWAN
card.
7. Remove the
display
assembly.
8. Remove the
display
bezel.
9. Remove the
display
panel.
About this task
The following images indicate the location of the eDP cable and provide a visual representation of the removal procedure.
Steps
1. Disconnect the eDP cable from the connector on the camera/microphone module.
74
Removing and installing components
after working inside your
before working inside your
card.
card.
computer.
computer.