Steps
1. Connect the display cable to the connector on the display panel and close the latch.
2. Adhere the conductive tape to secure the display cable to the display panel.
3. Close the display panel and the display back cover to assemble.
NOTE:
Ensure that the display panel tabs are inserted into the slots on the display cover.
4. Replace the two (M2.5x3) screws to secure the display panel to the display back cover.
Next steps
1. Install the
display
bezel.
2. Install the
display
assembly.
3. Install the
WLAN
card.
4. Install the
WWAN
card.
5. Install the
base
cover.
6. Install the
microSIM
card.
7. Install the
microSD
card.
8. Follow the procedure in
70
Removing and installing components
after working inside your
computer.