System Board; Removing The System Board - Dell Latitude 5430 Service Manual

Steps
1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest assembly.
2. Route the speaker cable through the routing guide on the assembly inner frame and palm-rest assembly.
3. Connect the speaker cable to the connector on the system board.
Next steps
1. Install the 3-cell battery
2. Install the base cover.
3. Install the microSIM card.
4. Install the microSD card.
5. Follow the procedure in

System board

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the microSIM
4. Remove the base cover.
5. Remove the 3-cell battery
6. Remove the M.2 2280 solid-state drive
7. Remove the WLAN card.
8. Remove the WWAN card.
9. Remove the memory module.
10. Remove the heat-sink
11. Remove the assembly inner
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
44 Removing and installing components
or 4-cell battery.
after working inside your
before working inside your
card.
card.
or 4-cell battery.
or M.2 2230 solid-state
assembly.
frame.
computer.
computer.
drive.