Steps
1. Align and place the keyboard on the keyboard bracket.
2. Replace the six (M2x2) screws to secure the keyboard to the keyboard bracket.
3. Flip the keyboard assembly.
4. Align and place the keyboard assembly on the palm-rest assembly.
5. Replace the seventeen (M2x2) screws to secure the keyboard assembly to the palm-rest assembly.
6. Connect the keyboard cable and keyboard backlight cable to the connector on the touchpad.
Next steps
1. Install the
system
board.
2. Install the
assembly inner
3. Install the
memory
module.
4. Install the
WLAN
card.
5. Install the
WWAN
card.
6. Install the
M.2 2280 solid-state drive
7. Install the
3-cell battery
8. Install the
base
cover.
9. Install the
microSIM
card.
10. Install the
microSD
card.
11. Follow the procedure in
frame.
or
M.2 2230 solid-state
or
4-cell
battery.
after working inside your
drive.
computer.
Removing and installing components
57