Dell Latitude 5430 Service Manual page 92

Table 7. System setup options—Integrated Devices menu (continued)
Integrated Devices
Miscellaneous Devices
Unobtrusive Mode
Enable Unobtrusive Mode
Table 8. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation
SMART Reporting
Enable SMART Reporting
Drive Information
SATA-1
Type
Device
M.2 PCIe SSD-1
Type
Device
M.2 PCIe SSD-2
Type
Device
Enable MediaCard
Secure Digital (SD) Card
Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.
Table 9. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
Full Screen Logo
92 BIOS setup
By default, the Lan option is enabled.
Enable or disable Fingerprint Reader device.
By default, the Enable Fingerprint Reader Device option is enabled.
Enable or disable all the computer light and sound.
By default, the Enable Unobtrusive Mode option is disabled.
Set the operating mode of the integrated storage device controller. By default,
the RAID On option is enabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during computer startup.
By default, the Enable SMART Reporting option is not enabled.
Displays the SATA-1 type information of the computer.
Displays the SATA-1 device information of the computer.
Displays the M.2 PCIe SSD-1 type information of the computer.
Displays the M.2 PCIe SSD-1 device information of the computer.
Displays the M.2 PCIe SSD-2 type information of the computer.
Displays the M.2 PCIe SSD-2 device information of the computer.
Enable or disable the SD card.
By default, the Secure Digital (SD) Card option is enabled.
By default, the Secure Digital (SD) Card Read-Only Mode option is not
enabled.
Enable to set screen brightness when the computer is running on battery
power.
Enable to set screen brightness when the computer is running on AC power.
Enable or disable full screen logo.
By default, the option is not enabled.