Palm-Rest Assembly; Removing The Palm-Rest Assembly - Dell Latitude 5430 Service Manual

About this task
The following images indicate the location of the display back cover and provides a visual representation of the installation
procedure.
Steps
Place the display back cover on a flat surface.
Next steps
1. Install the display hinges.
2. Install the sensor board.
3. Install the eDP cable.
4. Install the camera/microphone
5. Install the display panel.
6. Install the display bezel.
7. Install the display assembly.
8. Install the WLAN card.
9. Install the WWAN card.
10. Install the base cover.
11. Install the microSIM card.
12. Install the microSD card.
13. Follow the procedure in

Palm-rest assembly

Removing the palm-rest assembly

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the microSIM
4. Remove the base cover.
module.
after working inside your
before working inside your
card.
card.
computer.
computer.
Removing and installing components 81